How to Remove Creases from Leather Shoes [6 Easy DIY Methods]

  • By: Christopher
Affiliate Disclaimer

As an affiliate, we earn from qualifying purchases. We get commissions for purchases made through links in this post.

Affiliate Disclaimer: As an Amazon Associate I earn from qualifying purchases read more.

Leather shoes are a classic wardrobe staple that you can wear for almost any occasion. However, leather is prone to creases and wrinkles, which can make your shoe look old, unattractive, and worn out.

We know you want to look sharp when you’re out with your friends and family, but creased leather shoes ruin your look. You don’t have to worry; we got your back.

In this blog post, we’ll explore simple ways to remove these unwanted marks from your shoes, what causes them, and how to prevent them in the future.

What Causes Creases on Leather Shoes?

Do your shoes have creases on them? It might not be time to throw them away just yet. This section will explore the most common cause of shoe creasing and possible mitigation to prevent it.

So don’t be too quick to toss those old kicks! You may simply need some better storage options or more frequent breaks from wearing them, among other factors.

1. Improper Shoe Storage

The most common cause of creasing is that the shoe has been stored improperly. If you keep your shoes in a position where they are left bent or folded, this can start to show up as wrinkles on the leather.

Storing shoes squeezed in racks or folded in a suitcase is also a major cause of creases and wrinkles.

Shoes should be stored on a flat surface, resting on their soles, preferably on a shoe rack or a flat surface on the ground.

2. Walking Style

Your gait will have an impact on the nature and durability of your shoes. If your foot rolls to the side when you walk, for example, you could also be twisting the leather.

Depending on whether you are an over-pronator or under-pronator, it is good to purchase shoes suitable for your foot to avoid exerting more stress on the leather.

3. Flat Toe Box

If the toe box of your shoe has a low toe spring (or is too flat), your toes and middle foot area generally have to work more to push your foot off the ground. This causes your toes to bend more and leads to more creasing.

4. Larger Fit Shoes

If your shoes are a size larger than your foot, they will have excess room between the foot and the upper. This makes it difficult for the foot to hold the shoe’s shape properly, resulting in creases.

5. Moisture

Excessive sweating can lead to your shoe absorbing too much moisture, which can also lead to creasing. This is more so if you stay in your shoes for too long.

6. Shoe Design and Model

This plays a big part in shoe creasing. Shoes that are made with one piece of leather (whole cut) tend to crease more than heavily ornamented styles.

How To Remove Creases From Leather Shoes

If you’re a shoe owner, chances are you’ve experienced the frustration of having to deal with creases. These pesky lines on your leather shoes can make them look old and unfashionable.

However, if you follow these simple steps, it’s possible to remove those unsightly creases in no time at all!

1. Iron and Cotton Cloth Method

First, fill up your shoes with crumpled-up newspaper or a few pieces of stiff cardboard to help hold the shape of the shoes. Fill up the shoes as tight as you reasonably can – this will help straighten out the creases.

Wet a small towel or washcloth with water and lay it over the creased section of the shoes. This protects the shoe from receiving too much direct heat.

Set your iron between 60-80 degrees Fahrenheit, then iron the towel for a few seconds at a time. Be sure to check the progress in between the presses to prevent damage.

The mixture of moisture and heat will soften the leather and remove creases. Leave the newspaper in the shoes to keep the shoes in shape when done.

2. Shoe Trees Method

Shoe trees are a valuable part of shoe maintenance. They help in the removal of shoe creases and also for standard shoe storage. They help to add rigidity that keeps the leather de-creased when you aren’t wearing the shoes.

Cedar shoe trees also help remove moisture and keep your shoes smelling fresh.

Considered the world’s finest shoe trees, Cedar Space Store Cedar Shoe Trees have long been a favorite of men, women, and children shoes.

Use them in shoes or boots to keep their shape during storage or when not being worn! These cedar shoe trees are made of natural cedar wood with a heartwood content of up to 85%, just for added durability. 

The Cedar Space Store Cedar Shoe Trees is placed inside the shoes to help maintain them longer and retain its original shape.

Cedar Shoe Trees know that every customer is unique and want to give each of them their pair, which means they can be tailored specifically to the needs of those respective customers.

It has natural curves that resemble an actual human foot that once inserted into the affected shoe, will guarantee the removal of all creases and wrinkles and the restoration of the original shoe shape.

3. Heat Gun or Blow Dryer Method

You can use a heat gun or a blow dryer to remove creases. It is riskier because direct heat can cause permanent damage to the leather.

Insert cedar shoe trees into the shoes to fill the space inside the shoe and mold the leather against a shape that closely resembles a foot.

Adjust the blow dryer or heat gun to a low to medium setting and hold it approximately 10 inches away from the shoe. Then gently make a few passes back and forth to warm the leather.

Massage or gently rub the warm leather against the shoe tree. You can repeat this method several times until creases and wrinkles are minimized.

We highly recommend the ENERTWIST 1500W Heat Gun with Variable Temperature Control. Because unlike other heat guns, it comes with ‎4 Nozzle Deflectors and 5 Scraper Kit free.

Features:

  • Operating Temperature Range: 176℉- 932℉(80℃- 500℃)
  • Voltage: ‎120 Volts
  • Item Weight: 4.16 pounds (1.8 KGs)
  • Extra Features: ‎Over heating protection, 4-position slide type switch for high, medium, low temperature @ different flow rate and off switch.

4. Shoe Stretcher Method

It is always frustrating when your shoes are too small, and it can be even worse if you’re wearing them all day. This will not only cause creases and wrinkles in your leather shoes. It might also lead to a foot injury.

The shoe stretcher will make sure to give you some extra room in those tight areas so that grinding or squeezing won’t happen again!

We always recommend the Super GuGu Shoe Stretcher, because of its ease of use and superior built quality.

How to Use

It’s very easy to use this product:

  • Start by inserting into the sole of any size footwear with ease; 
  • Then turn clockwise until they’re snugged up against one another for 24-48 hours (or longer). 
  • This means less pain from poor fitting pairs – plus larger feet at last. What’s more, the annoying creases will be eliminated.

However, the shoe stretcher doesn’t fit boots, as the stretching mechanism is too small to fit into the long boot calf/ shaft.

5. Shoe Crease and Anti-Wrinkle Shoes Protector

A Shoe Crease and Anti-Wrinkle Shoes Protector such as the Comfowner Anti-Wrinkle Shoes Creases Protector, is Made from premium, lightweight material that fits into your shoes and boots with a rounded toe box area.

This ensures that the craftsmanship and materials of your favorite leather shoes will be preserved.

It also ensures that your shoes won’t stretch or wear down quickly, as the protectors combat unwanted shoe creases by surrounding them to maintain their shape.

Whether you’re using it as a prevention measure for your new purchase or as a way to preserve some long-treasured essentials, this accessory has wide usage and great benefits.

The best thing about the Comfowner Anti-Wrinkle Shoe Creases Protector is that they’re easy to store and simple to use: 

  • Simply loosen the laces and insert the protectors inside the toe box area of your shoes;
  • Make sure the crease protector is for the left shoe or for the right shoe to ensure the intended shoe shape is maintained;
  • You can then choose to wear the shoes or store them;
  • The crease protector has 30 venting holes and is lightweight to ensure comfort and flexibility to the shoe wearer.

6. Leather Cleaner and Leather Conditioner

You can use leather conditioners and oils to remove creases. It is, however, recommended to test the leather conditioner or oil by applying it to an inconspicuous spot on the shoe.

It is good to polish/condition the entire shoe to maintain a consistent color/finish. Continue to work the oil into the leather with your hands.

The Chemical Guys Leather Cleaner and Leather Conditioner Kit is a pH-balanced formula that will clean the leather and preserve it, while also being gentle on your skin.

It penetrates into pores to lift dirt or oils from within so you can get rid of all those pesky stains!

Leather cleaner is colorless and odorless, and it penetrates the pores of your leather to lift dirt, creases, and wrinkles while also conditioning with Vitamin E. This ensures that the leather remains smooth and stretchy to prevent the reoccurrence of creases.

The product is easy to use; it will leave no residue like soap and won’t contribute to leather fiber deterioration, depolarization, disintegration, and decay.

Final Words

To conclude, creases on leather shoes are not an indication of quality. This means you can go for more affordable leather shoes but still get them looking great with some time and care!

We hope that the compiled list of the best practices and methods for removing creases from leather shoes is sufficient and effective in removing the creases and wrinkles.

You can now enjoy your favorite wrinkle-free leather shoes. You look sharp!

Last update on 2024-04-11 / Affiliate links / Images from Amazon Product Advertising API