How to Remove Security Tag from Shoes After Purchasing Them | Step-by-Step Guide

  • By: Christopher
Affiliate Disclaimer: As an Amazon Associate I earn from qualifying purchases read more.

Share this Article!

Have you ever purchased a pair of shoes, only to later realize that the security tag was still attached? It’s frustrating to encounter this problem when you’re eager to wear your new kicks.

In this blog post, we will teach you how to quickly and easily remove security tags from shoes without going back and asking the store’s employees for assistance.

We’ll give detailed instructions on exactly what steps need to be taken in order to succeed. So forget those nasty, hard-to-remove sticky labels or markings; with our tips, you can remove these pesky tags without suffering any unexpected hassles.

How to Remove Security Tag from Shoes

In this section, we will discuss six ways to safely and effectively remove any security tag from your shoes without damaging them in the process. Read on to learn how.

1. Using Scissors 

One of the easiest ways to remove security tags from your shoes is to cut the tag using a pair of scissors. To use this method, you will need a pair of scissors suitable for your hands (left or right-handed) and a flat surface to place your shoes on.

Also, ensure that your scissors are not blunt. To remove the tag, look for where the tag is attached to your shoe and cut it to free it from your shoes. This is most likely to be on a shoelace hole.

Though this method is quicker, you should be careful as you can damage your shoes if not handled carefully.

We highly recommend the Fiskars Original Orange Handled Scissors as they are ergonomically contoured to get into the tags locking mechanism for effective cutting. 

The scissors is made of stainless steel and thus is guaranteed not to rust. It’s also ideal for paper and fabric cutting for office and Arts and Crafts use.

2. Use Heat to Detach the Tag

Another way to remove security tags from your shoes is to use heat. This can be achieved by using two tools: a Hair dryer or a lighter.

To remove the security tag using this method, you will need to heat or burn the tag for a few minutes until it melts. Once it is hot, do not use your hands to pull out the tag. Instead, use a pair of tweezers or pliers to pull the tag out. It should easily pop from the lock.

If your tag has a dome tag, cut it off with a knife to reveal a spring. Compress the spring to pop the tag of your shoe. Like the use of scissors, this method is quick and easy but can be dangerous if not handled properly.

3. Use Rubbing Alcohol

A third method to remove security tags from your shoes is rubbing alcohol. The rubbing alcohol slowly dissolves the adhesive used to secure the security tag onto the shoes. 

To use this method, you will need rubbing alcohol and cotton wool. 

Steps to Follow:

  1. Cut the cotton wool from cotton balls which you will soak in rubbing alcohol and place over the security tag, 
  2. Let the soaked cotton swab soak into the security tag for 30 minutes. 
  3. This will help lubricate the tag lock and adhesive and make it easy to pull from your shoes. 

4. Use a Magnet

A fourth way to remove security tags from shoes is by using magnets. You will need a couple of magnets or a strong magnet to use this method.

Place the magnet on the end with the pin and let the magnet stay there for a couple of minutes until the security lock pops open.

The time used to remove the security tag depends on the type of magnet used to make the security tag. While this method is safe to use, it might take more time compared to other methods.

5. Freeze the Tag

Place the shoes with the attached security tag inside a plastic bag and seal it tightly. Put the bag in your freezer for a few hours or overnight.

The extreme cold can sometimes make the tag more brittle, and you may be able to break or snap it off with pliers or by applying force.

However, this method may damage the shoe and is not recommended, especially for velvet, nubuck, and suede shoes.

6. Seek Professional Assistance

If all else fails, you can seek professional help from a locksmith or a shoe repair shop. They may have specialized tools or knowledge to remove the security tag without causing damage to the shoes.

Ensure to explain the situation and provide proof of purchase to demonstrate that the item is rightfully yours.

Why You Need To Remove Security Tags from Shoes

Removing security tags from shoes immediately after purchasing them has various benefits. These benefits include:

1. It is not Fashionable

Walking around with shoes that have their tag on looks unfashionable. Various security tags have different designs and shapes that may not favor your shoe’s design, color, and shape and thus might make your shoes an eye sore.

2. To Avoid Injuries

Another reason why you need to remove security tags from your shoes is to prevent sustaining injuries. Most shoe security tags are located in a shoelace hole.

This may affect how you secure your laces while using your shoes. Loose laces can prove to be a tripping hazard which might lead to a fall leading to severe injuries.

3. To Avoid Setting off Metal Detectors

You need to remove security tags from your shoes to prevent them from setting off metal detectors in malls or other buildings.

Since most security tags have metal parts inside them, passing through metal detectors in malls and other buildings can be inconvenient.

4. To Avoid Being Labeled a Shoplifter

Lastly, you must remove security tags from your shoes to avoid being looked at as a shoplifter. The main reason shoe stores use security tags is to prevent shoplifting.

If a shoe is taken from the store without removing the tag, the alarm will go off, alerting the attendants that a shoe has been stolen. Please remove the security tag to prevent people from associating you with shoplifting.

Final Words

Taking off the pesky security tags from your shoes can be challenging, but it doesn’t have to be. By now, you know that the trickiest part of this process is preserving the integrity of your new shoes while you get them free from the tag.

Nonetheless, many DIY methods are available for removing shoe tags that are relatively quick and painless, from freezing them with a bag of ice to using rubbing alcohol to slowly dissolve the adhesive used to secure the tags to the shoes.

In essence, no matter which method you choose, always be sure that your safety and shoes come first! Above all else, enjoy wearing your new shoes out for a stylish strut through town.

Last update on 2024-04-11 / Affiliate links / Images from Amazon Product Advertising API